Leica Captivate Technical Reference Manual page 227

Connections - All other connections,
Control Key
Description of fields
Field Option
Radio type Display only
Channel Editable field
Actual fre- Display only
quency
Actual Tx Display only
power
Radio pro-
tocol
Satel 4-FSK,
Satel 8-FSK,
Satel 16-
FSK,
PacCrest 4-
FSK,
PacCrest
GMSK,
PacCrest
FST,
TrimTalk(P)
GMSK
and
TrimTalk(T)
GMSK
Forward Check box
error cor-
rection
(FEC)
Settings depending on protocol
Protocol Baud rate
12.5 kHz
Satel 4FSK 9600
Description
The type of radio highlighted when this
panel was accessed.
The radio channel. The channel used must be
within minimum and maximum allowed input
values. The minimum and maximum allowed
input values for a radio depend on the num-
ber of channels supported by the radio and
the spacing between the channels.
Available for all Satel radios. Displays the cur-
rent frequency of the radio.
Available for some Satel radios.
The currently used Tx power of the radio is
displayed. The value can vary, if the mode
Auto is set in the channel list for the Tx
power.
Available when a Satelline radio is selected as
Radio type.
Different protocols are selectable. Example:
Pacific Crest or TrimTalk compatibility. The
radio must be active to accept the settings.
The radio need not be connected to a com-
puter and no configuration software is nee-
ded.
Defines the settings for the used modulation
type. Shows the compatibility to Pacific
Crest/TrimTalk. The available options depend
on the used radio hardware and firmware.
Available for Radio protocol: Satel 4-FSK.
When this box is checked, Forward Error
Correction can be set on or off. Satel 4-FSK
is the only protocol, where FEC can be
defined separately.
Baud rate Modulation
25 kHz
19200 4FSK
Use Forward
Error Cor-
rection
ON
227