Leica Captivate Technical Reference Manual page 745

Roads - Road
Field Option
Height Editable field
Height dif- Editable field
ference
For Stake: Slope
Field Option
Working Editable field
chainage
Left line Selectable list
Right line Display only
Reference Left line or
line Right line
For Stake: Crown
Field Option
Working Editable field
chainage
Crown line Selectable list
Left line Display only
Right line Display only
Description
b
c
a
Road_105
a Hinge point of manual slope
b Defined hinge offset (-)
c Left surface grade of design
d Selected hinge reference
The elevation of the hinge point (absolute
height). Available for Height offset
type: Absolute.
For Height offset type: Relative to line: A
vertical offset for the hinge point using a
height difference can be defined.
For Height offset type: Relative to DTM: A
height difference to the DTM height can be
applied.
Description
The chainage for the stake/check survey. The
chainage can range between the start chain-
age and the end chainage. The default is the
setup point for TS and the current position
for GS.
The name of the left line defining the slope.
The name of the right line defining the slope.
To select one of the lines to be used as the
reference line. The reference line is the hinge
line.
Description
The chainage for the stake/check survey. The
chainage can range between the start chain-
age and the end chainage. The default is the
setup point for TS and the current position
for GS.
Line defining the middle line of the crown.
Refer to "45.2.2 Selecting a Line".
The name of the line defining left line of the
crown.
The name of the line defining right line of
the crown.
d
745