Table of Contents
Advertisement
23.4
Access
Tilt Compensation
Settings - GS Sensor
Field
Option
Rate
From 0.05
sec to 300.0
sec
Logging
Selectable list
starts when
Log data to
Selectable list
Tilt compensation
For GS18 when operating as RTK rover:
Select Leica Captivate - Home: Settings\GS Sensor\Tilt compensation.
Key
Description
OK
To accept changes.
Description
Rate at which raw observations are logged.
For Rate: 0.05 sec, the use of Use Smar-
tLink is disabled (Satellite Tracking, Aug-
mentation page).
For GS08plus logging rates of 0.2 s and
slower are supported.
Recommendations:
The maximum logging rate using Blue-
•
tooth on the field controller is 0.2 s.
•
For static operations with long baselines
and over long time Rate: 15.0 sec or
Rate: 30.0 sec.
For base stations for post-processed and
•
real-time kinematic rovers, Rate at the
base should be the same rate as at the
rover.
•
For initialisation while static and occupy-
ing distinct points in kinematic chains
Rate between 0.1 sec and 2.0 sec.
Available for Store data on: GS sensor.
Data logging can start as soon as the instru-
ment is turned on or only while in the Meas-
ure app.
For GS08plus, data can only be logged with
the Measure app.
Unavailable for SmartStation.
Available for Store data on: GS sensor and
Log data when dynamics are: Static. Data
can be logged in the Leica proprietary MDB
format or in RINEX.
For GS08plus, this field is available for Log
data when dynamics are: Static.
289
Advertisement
Table of Contents
