Table of Contents
Advertisement
Residuals
538
Next step
IF
a field displays -----
a field displays a value
all parameters are con-
figured
Displays a list of the matched points used in the transformation calculation and
their associated residuals.
Key
Description
OK
To accept the residuals and to continue with the subsequent
panel.
Result
To view results of the transformation. Refer to "39.3.5 Trans-
formation Results for Onestep and Twostep".
Description of metadata
Metadata
Description
-
The point ID of the points chosen from Job where WGS84
points are stored.
East
The Easting residual. If positions are not used in the trans-
formation calculation then ----- is displayed.
North
The Northing residual. If positions are not used in the trans-
formation calculation then ----- is displayed.
Height
The Height residual. If heights are not used in the transfor-
mation calculation then ----- is displayed.
!
Indicates residuals that exceed the residual limit defined in
Settings, Residuals page.
!
Indicates the largest residual in East, North and Height.
AND
the parameter must be
fixed to a value
the parameter must be
calculated
-
Determine Coordinate System
THEN
highlight the field. Fix.
Enter the value of the
parameter.
highlight the field.
Adjust.
OK computes the trans-
formation and contin-
ues to Residuals.
Advertisement
Table of Contents
