Table of Contents
Advertisement
37.2
Description
430
Icon
Description
Store code
Available for the Measure app.
template
To save the current list of up to ten code boxes to a tem-
and Load
plate. The template is stored to the job codelist. When stor-
code tem-
ing a template, a name must be assigned.
plate
The template can be reloaded so that the current code
boxes are filled in the order and with the codes including
related features.
Available for Coding functionality: Create linework with
multicoding disabled, that is Multi on is visible on the
screen.
Individual
To change between entering an individual point ID different
point ID and
to the defined ID template and the running point ID accord-
Sequential
ing to the ID template. Refer to "26.3 ID templates".
point ID
Measure
To measure points which cannot be measured directly by
hidden
GNSS, because, either they cannot be physically reached, or
point
because satellites are obstructed, for example by trees or tall
buildings. Refer to "37.5 Measure - Hidden Points".
Select next
For GS Stakeout:
nearest
To search the design job for the point nearest to the current
point
position. The point is selected as the point to be staked and
is displayed in the first field on the panel. After staking and
storing the nearest point, the next point suggested for stak-
ing out is the one which was suggested before the key was
pressed.
☞
Turn TS to
For TS Stakeout:
point in 2D
To position the telescope (X,Y) onto the point to be staked.
Turn TS to
For TS Stakeout:
point in 3D
To position the telescope (X,Y,Z) onto the point to be staked.
Manual
For TS Stakeout:
enter Hz &
To enter angle and distance values to stake out a point.
distance
Export cut
For TS Stakeout:
sheet
To export a stake report showing the differences between
the staked points and the design points.
Closest
To select the point closest to the point which was measured.
point
Measure
Provides points calculated from averaged backsight-foresight
Foresight
sets from the setup position.
Reset backsight point
This feature is available in TS mode.
Available for the setup methods Set orientation, Known backsight, Resec-
tion and Multiple backsights.
Usage
Assign the function GS - Select next nearest
point to the favourites or a hot key. Refer to
"2.2.1 Hot Keys" for information on hot keys.
Apps - The Toolbox
Advertisement
Table of Contents
