Leica Captivate Technical Reference Manual page 976

Volume Calculation
Results,
Summary page
976
Field Option
Height Editable field
or display
only
Next step
OK calculates the volume and continues to Volume Calculation Results.
Key Description
OK To close the triangulation of the surface.
Page To change to another page on this panel.
Fn Settings To configure the app. Refer to "59.3 Configuring Volumes &
Surfaces".
Description of fields
Field Option
Surface Display only
name
Point ID Display only
Height Display only
Area Display only
Net volume Display only
Volume Display only
above refer-
ence sur-
face
Description
The height to which the volume is calculated.
Description
Name of the surface used for the calculation.
Available for Volume calculation
method: Surface to entered height and
Volume calculation method: Surface to
point.
The point to which the volume is calculated.
Available for Volume calculation
method: Surface to point.
The elevation of the point to which the vol-
ume is calculated. Available for Volume cal-
culation method: Surface to entered
height and Volume calculation
method: Surface to point.
Area of the base plane.
Volume of the surface.
Cut of the volume. Available for Volume cal-
culation method: Surface to entered
height and Volume calculation
method: Surface to point.
Volumes & Surfaces