Leica Captivate Technical Reference Manual page 163

Connections - CS connection wizard
Description of fields
Field Option
Connect
using
Radio han-
dle, Blue-
tooth,
External
radio
Cable
Cable RS232
WLAN
Next step
Next changes to the next panel.
IF
connected using RadioHandle
connected using TCPS27/
TCPS28
connected using TCPS29/
TCPS30
connected using cable
a MS60/TS60 is connected
using cable and Leica Capti-
vate is running on the field
controller
Description
How the instrument is connected.
☞
For CS35, only Bluetooth connec-
tions can be configured.
When External radio is selected, choose the
type of External radio in use.
For TS16: Serial cable connection.
For MS60/TS60: USB cable connection. Select
Cable for a USB cable connection. Use the
cables GEV234 (LEMO - USB), GEV237 (LEMO
- LEMO) or GEV261 (combined RS232/USB
cable).
Available when A software other than
Leica Captivate is checked in the previous
panel.
Available on MS60/TS60 to configure serial
connection.
Available when A software other than
Leica Captivate is checked in the previous
panel. Requires settings in WinCE.
THEN
Next changes to the next panel.
The RadioHandle is detected automatically, if
it is plugged into the TS. The name of the
RadioHandle is then displayed.
If the RadioHandle is not plugged onto the
TS, then select the RadioHandle which is
used. Press Next.
☞
The RH17 can only be connected
to a CS20 equipped with a CTR20.
Select the TCPS connected and press Next.
Refer to "15.2 Connection Using TCPS".
Select the TCPS connected and press Next.
Further settings are not required.
refer to "15.3 Connection Using Cable".
the system sets all the parameters to be able
to connect to a CS using USB interface from
port 1.
163