Table of Contents
Advertisement
Define Track Design,
MxGenio for Rail jobs
Select Layers to
Import,
for DXF Road/Rail
data,
LandXML Road/Rail
data,
Terramodel Road data
and
Carlson Road data
130
For MxGenio, only single track Rail jobs can be created.
Key
Description
OK
To start the import.
Ch CL
To select/deselect the highlighted line as external chainage
centreline. The selection is optional.
Track cl
To select/deselect the highlighted line as track centreline.
The selection is mandatory.
Left rail
To select/deselect the highlighted line as left rail. The selec-
tion is optional.
Right rail
To select/deselect the highlighted line as right rail. The selec-
tion is optional.
☞
Line selection is also possible in 3D viewer.
IF
a single line must be selected/dese-
lected
the context menu must be activated
Description of metadata
Metadata
Description
-
Displays the name of all the lines.
Use as
Displays a line selected as external chainage centreline, track
centreline, left rail or right rail.
Next step
OK start the import.
Key
Description
OK
To start the import.
Edit
For Road: To define the centreline and to exclude/include
•
the highlighted line from/to import.
•
For Rail: To define the external chainage centreline
(optional), to define the track centreline (mandatory), to
define the left rail (optional) and to define the right rail
(optional).
☞
☞
To select a single line, tap on the line.
•
THEN
tap on the line.
hold down the supplied stylus any-
where on the map for 0.5 second.
Refer to "35.6 Context Menu".
By default, the longest line is set as the centreline.
For DXF and LandXML data (Road and Rail), line
selection, per layer, is also possible in 3D viewer.
Names of the Road lines from design data are dis-
played in black. Names of the selected line is dis-
played in red.
Job Menu - Import data
Advertisement
Table of Contents
