Table of Contents
Advertisement
Edit design data,
Layer page
Roads - General
Next step
IF you want to
edit data
view data
Only available for Road.
Key
Description
Store
To store data and return to the previous panel.
Centre
To set the highlighted line as centreline.
Use
To set Yes or No in the metadata for excluding/including the
highlighted line of selected layer.
Page
To change to the next page.
Fn All or
To change the setting for the Use metadata for all lines at
Fn None
once.
☞
Description of metadata
Metadata
Description
-
The name of all the lines in the layer.
Centreline
Shown for the line selected as centreline.
Use
For Yes:
The selected line is used for stake/check.
For No:
The selected line is not used for stake/check.
Stringlines with this status are drawn in 3D viewer, but they
are not included in the profile.
THEN press
Edit. Refer to "Edit design data,Layer page".
View. Refer to "View design data,Line infor-
mation page".
Deactivates also the centreline.
623
Advertisement
Table of Contents
