Table of Contents
Advertisement
Matched Points (n)
536
Field
Option
CSCS model
Selectable list
Next step
OK continues to Matched Points (n).
This panel provides a list of points chosen from Job where WGS84 points are
stored and Job where local points are stored. The number of control points
matched between both jobs is indicated in the title. Unless there is no pair of
matching points in the list all softkeys are available. Refer to "39.3.4 Matching
Points: Selecting/ Editing a Pair of Matching Points" for information on how to
match points.
Key
Description
Calculate
To confirm the selections, compute the transformation and
continue with the subsequent panel.
New
To match a new pair of points. This pair is added to the list.
A new point can be manually occupied. Refer to "Choose
Matching Points/Edit Matching Points".
Edit
To edit the highlighted pair of matched points. Refer to
"Choose Matching Points/Edit Matching Points".
☞
Delete
To delete the highlighted pair of matched points from the
list.
Match
To change the type of match for a highlighted pair of
matched points. Refer to "39.3.4 Matching Points: Selecting/
Editing a Pair of Matching Points".
Auto
To scan both jobs for points that have the same point ID.
Points with matching point IDs are added to the list.
Description
For Classic 3D: The CSCS model to use in the
transformation.
If a coordinate system to be updated contains a
point that was deleted from the job and a new
point was created in that job with the same point
ID but different coordinates, the coordinates of
the old point are still used for the calculation.
Pressing Edit to edit a highlighted pair of matched
points containing the deleted point, overwrites the
coordinates of the old point. The coordinates of
the new point are used in the calculation.
Determine Coordinate System
Advertisement
Table of Contents
