Creating New Point Groups - Leica Captivate Technical Reference Manual

49.2.3
Description
Access
New Point Group
854
Field Option
Sun &
reflections
Use ultra Check box
fine aiming
Automati- Check box
cally meas-
ure points
Next step
Page changes to the Report sheet page.Refer to "36 Apps - General".

Creating New Point Groups

The points to be used for Sets of Angles can be selected and the first set
measured. The measurement settings of the first measurement to each point
are used for all further sets.
Highlight Create a new group in Measure sets of angles and OK.
Key Description
Store To store the new points group.
Fn Settings To configure the Sets of Angles app.
Description of fields
Field Option
Point group Editable field
name
Description
To increase the instrument measuring ability
during incident solar radiation and reflec-
tions, for example safety vests. This mode
has a considerable influence on the range
(restriction 100 - 150 m). This mode is auto-
matically deactivated when the instrument is
turned off.
Reduces the field of view of the ATRplus. The
setting is only applied for Aim at target:
Automatic.
Check this box to survey the target points
automatically. The instrument turns automat-
ically and measures the target point. For
instruments with automatic aiming.
Description
The name of the points group.
Sets of Angles - TS