Leica Captivate Technical Reference Manual page 537

Classic 3D Parameters
Determine Coordinate System
Description of metadata
Metadata Description
- The point ID of the points chosen from Job where WGS84
points are stored.
Local point The point ID of the points chosen from Job where local
points are stored.
Match The type of match to be made between the points. This
information is used in the transformation calculation.
• For Onestep or Twostep possible options are Position &
height, Position only, Height only or None.
For Classic 3D, possible options are Position & height
•
or None.
None removes matched common points from the transfor-
mation calculation but does not delete them from the list.
This option can be used to help improve residuals.
Next step
Calculate computes the transformation and continues to Residuals or to
Classic 3D Parameters if Prompt me to enter fixed transformation
parameters was checked.
The settings on this page define the parameters to be used in a Classic 3D
transformation. Refer to "I Glossary" for more information about how many
transformation parameters are computed, based on the number of points com-
mon to both datum.
IF the value for a field is
-----
any number
Description of fields
Field Option
Model Bursa-Wolf
or
Moloden-
sky-Badekas
Shift dX Editable field
Shift dY Editable field
Shift dZ Editable field
Rotation X Editable field
Rotation Y Editable field
Rotation Z Editable field
Scale Editable field
THEN the value for this parameter will be
calculated.
fixed to that value.
Description
The transformation model to be used. Refer
to standard surveying literature for details on
the models.
Shift in X direction.
Shift in Y direction.
Shift in Z direction.
Rotation around the X axis.
Rotation around the Y axis.
Rotation around the Z axis.
Scale factor.
537