Segment An Arc - Leica Captivate Technical Reference Manual

38.7.4
Exceptions to line cal-
culation segmenta-
tion
502
Description of fields
Field Option
Point ID Editable field
Height or Editable field
Local ellip-
soid height
Offset point Display only
Distance Display only
along line,
Distance
along line
(ground) or
Distance
along line
(ellipsoid)
Offset, Off- Display only
set (ground)
or
Offset
(ellipsoid)
Line length Display only
Line bearing Display only
Bearing to Display only
offset point
Next step
On the Code page, type in a code if desired.
On the 3D viewer page, the line and the new point is shown.
Store stores the result.

Segment an Arc

The arc segmentation and the functionality of all panels and fields are similar
to those for line segmentation. Refer to "38.7.5 Segment a Line"
New field and option in Define Arc Segmentation
Field Option
Method Delta angle
Delta angle Editable field
Description
The identifier for the COGO point depending
on the point ID template configured for GS
points / TS points in ID Templates.
The height of the start point of the line is
suggested. A height value to be stored with
the calculated point can be typed in.
Point ID of offset point. Available for Create
line using: Calculate line base point.
Horizontal distance from start point to base
point. Available for Create line using: Cal-
culate line base point.
Offset from base point to offset point. Posi-
tive to the right and negative to the left of
the line. Available for Create line using:
Calculate line base point.
Length of line from start point to end point.
Bearing of line from start point to end point.
Bearing of offset point from base point to
offset point.
Description
To divide the arc by an angular value.
The angular value by which new points are
defined on the arc.
COGO