Table of Contents
Advertisement
Set Backsight Refer-
ence
Define the Backsight
Apps - The Toolbox
Next step
OK changes to Set Backsight Reference.
Available when the instrument was set up using Setup method: Known back-
sight.
Set the backsight to which the angles of the foresight measurements are rela-
ted.
The current setup is used.
Description of fields
Field
Option
Use the cur-
Option but-
rent back-
ton
sight as the
reference
point
Set another
Option but-
backsight as
ton
reference
point (the
current
setup will
be updated)
Next step
IF
Use the current backsight as the
reference point was selected
Set another backsight as refer-
ence point (the current setup will
be updated) was selected
This panel is displayed
•
when the instrument was set up without a known backsight. The instru-
ment is orientated but has no physical point as a backsight. Therefore a
backsight point must be measured.
•
when Set another backsight as reference point (the current setup
will be updated) was previously selected.
Key
Description
Set
To set the setup and orientation.
Distance
To measure a distance to the point being used to set the azi-
muth.
GS
When using SmartPole. To enter the Measure panel and
measure a point with GS. The antenna height is automatically
converted from the target height.
More
To change between the slope and the horizontal distance.
Description
Available when the instrument was set up
using Setup method: Known backsight.
The backsight from the current setup is used.
Foresight measurement is referenced to the
backsight.
Available when the instrument was set up
using Setup method: Known backsight.
The backsight from the current setup is
ignored. A new backsight must be defined.
THEN
OK to measure backsight-foresight
sets.
OK accesses Define the Backsight.
Refer to "Define the Backsight".
455
Advertisement
Table of Contents
