Hidden Point Settings - Leica Captivate Technical Reference Manual

37.5.3
Hidden Point Set-
tings,
General page
440
can exist in the job.
•
• can be manually measured during the hidden point measurements.
can be manually typed in.
•
The distance and the bearing from the hidden point to the known point are to
be determined. An auxiliary point helps compute the bearing which might not
be known. An auxiliary point can be measured in the direction from the hidden
point to the known point.
Diagram
P1
d
P0
GS_068

Hidden Point Settings

Key Description
OK To accept changes and return to the panel from where this
panel was accessed.
Search Available when a Bluetooth port and device is selected. To
search for all available Bluetooth devices. If more than one
Bluetooth device is found a list of available devices is provi-
ded.
Device To create, select, edit or delete a device.
Page To change to another page on this panel.
Description of fields
Field Option
Use a device Check box
to measure
hidden
points
Connect CS Blue-
using tooth 1 and
CS Blue-
tooth 2
CS RS232
port
Internal
Disto
Known
P0 Known point
P2
To be measured
Bearing from P2 to P0
α
d Distance from P2 to P0
P1 Auxiliary point, optional
Unknown
P2 Hidden point
Description
To compute a hidden point with height. Acti-
vates the hidden point connection. If not
checked, the measured values must be
entered manually.
The Bluetooth ports on the field controller
which are used for the connection function-
ality.
The RS232 port on the field controller.
The DISTO in the CS20.
Apps - The Toolbox