Leica Captivate Technical Reference Manual page 243

New Device or Edit
Device
Configuration of Devices
Key Description
Store To store the new device and to return to the panel from
where this panel was accessed.
AT Msg Available for digital cellular phones and modems. To config-
ure communication commands.
Description of fields
Field Option
Name Editable field
Type Display only
Baud rate From 1200
to 230400
Parity None, Even
or Odd
Data bits 6, 7 or 8
Stop bit 1 or 2
Flow control None or
Flow control
Next step
IF the device is a
radio or device other than digital cel-
lular phone or modem
digital cellular phone or modem
Description
Name of new device.
Same device type as was highlighted when
New or Edit was used.
Frequency of data transfer from instrument
to device in bits per second. Unavailable for
CS modem.
Error checksum at the end of a block of digi-
tal data. Unavailable for CS modem.
Number of bits in a block of digital data.
Unavailable for CS modem.
Number of bits at the end of a block of digi-
tal data. Unavailable for CS modem.
Activates hardware handshake.
When the instrument/device is ready for
data, it asserts the Ready To Send line indi-
cating it is ready to receive data. The sender
at the Clear To Send input reads this line,
indicating it is clear to send the data. Availa-
ble for some phone devices.
THEN
Store to close the panel and to
return to the panel from where this
panel was accessed.
AT Msg.
243