Leica Captivate Technical Reference Manual page 313

Settings - Customisation
Field Option
Humidity
Hz angle
Local ellip-
soid height
Moving
antenna
height
Logged raw
data coun-
ter
Northing
Offset
height
Offset
in/out
Offset left/
right
Offset
mode
PDOP
PPM total
Point ID
Pressure
Prism con-
stant
1D quality
2D quality
3D quality
Description
For GS:
Editable field for relative humidity to be
stored with point.
For TS:
Display only field for the horizontal angle.
For GS:
Display only field for the elevation of the cur-
rent GNSS position.
For GS:
Editable field for antenna height for moving
observations.
For GS:
Display only field for the number of static
observations recorded over the period of
point occupation. Appears in the page when
recording of static observations is configured.
For TS:
Display only field for Northing coordinate of
measured point.
For TS:
Editable field for height offset for measured
point.
For TS:
Editable field for horizontal distance offset, in
the direction of line of sight.
For TS:
Editable field for horizontal distance offset
for measured point, perpendicular to the line
of sight.
For TS:
Select offset mode.
For GS:
Display only field for the current PDOP of the
computed position.
For TS:
Display only field for the total ppm value.
Editable field for the point ID.
For GS:
Editable field for atmospheric pressure.
For TS:
Display only field for additive constant of
currently selected reflector.
Display only field for the current height coor-
dinate quality of computed position.
Display only field for the current 2D coordi-
nate quality of computed position.
Display only field for the current 3D coordi-
nate quality of computed position.
313