Table of Contents
Advertisement
Key
Done
Robust or
Least Sqrs
Page
Fn 3 param
or
Fn 4 param
Fn Params
Fn Add tar-
get
Fn Scale
Fn Scale
fctr or
Fn ppm
Description of fields
Field
New orien-
tation
Angle right
Difference
in height
Use the new
height
888
Description
To exit the setup without setting it, the setup is incomplete.
To display the results for the robust or the least squares cal-
culation method.
Available for setup method Resection.
To change to another page on this panel.
Switches between a 3 parameter and 4 parameter calcula-
tion. For 3 parameter, the current scale is not applied to
setup observations for a new setup calculation. For 4 param-
eter, the current scale is applied. The setup coordinates are
automatically updated according to the setting used. Defaults
to 4 parameter.
Available for setup methods Resection.
To access Parameters.
Available for setup method Orientate to object.
To access Measure Target and to measure more target
points.
To access Scale Corrections. Refer to "New Job,TS scale
page".
Available for setup method Resection.
To display the scale results by scale factor or as a ppm value.
Available for setup method Resection.
Option
Description
Display only
New oriented azimuth with running angle as
telescope moves. Unavailable for setup
methods Transfer height and Orientate to
object.
Display only
Available when Hz angle display: Angle
right is configured in Regional, Angle page.
Displays the horizontal angle difference
between the backsight point and the current
telescope position.
Display only
The difference between the new calculated
height and the old height.
Available for setup methods Multiple back-
sights and Transfer height.
Check box
For setup method Multiple backsights:
When this box is checked, both orientation
and height are updated. If not checked, only
the orientation is updated.
For setup method Transfer height: When
this box is checked, the setup height is
updated. If not checked, the setup height
does not change.
Not available for any other setup methods.
Setup - TS
Advertisement
Table of Contents
