Table of Contents
Advertisement
Create Offset Line &
Points
Extend existing poly-
line
152
Field
Option
Key
Description
OK
To store the line/points to the design job.
Page
To change to another page on this panel.
Description of fields
Field
Option
Line ID
Selectable list
Objects to
Line
create
Points
Line &
points
Single point
Offset
Editable field
Line ID
Editable field
Starting
Editable field
point ID
Start chain-
Display only
age
Chainage
Editable field
Point ID
Editable field
1.
In Choose line to extend select the line to extend.
2.
OK.
Description
☞
The line length is shown in the
unit configured in Regional, Dis-
tance page.
Description
To select a line. Open the selectable list to
access the Line Selection panel showing all
selectable lines from the design job.
To create lines only.
To create points only.
To create lines and points.
To create only one point.
Perpendicular offset of the line. Left is nega-
tive. Right is positive.
The name of the new line. The configured ID
template for lines is used. Type over the line
ID to change it.
The point ID of the line start point. The con-
figured ID template for points is used.
The beginning chainage of the line.
Chainage of the current position along the
line.
The name of the new point. The configured
point ID template is used. The ID can be
changed in the following ways:
•
To start a new sequence of point IDs,
type over the point ID.
For an individual name independent of
•
the ID template Fn Tools and then Indi-
vidual point ID. Fn Tools and then
Sequential point ID changes back to
the next ID from the configured ID tem-
plate.
Creating Points and Lines
Advertisement
Table of Contents
