Leica Captivate Technical Reference Manual page 636

Road Settings,
Rail design page
636
IF you work with
Tunnel
Available for Rail only.
Description of fields
Field Option
Nominal Editable field
gauge
Super-ele- Editable field
vation base
Use super- From design
elevation
Enter man-
ually
Show mes-
sage
Apply target Plumbline
height
THEN Page changes to the
Tunnel design page.
Description
Nominal distance between the active (inter-
nal) faces of the left and right rails.
a
b
Rail_014
a Superelevation base
b Nominal gauge
Distance over which the superelevation is to
be applied. This distance normally corre-
sponds to the distance between the rail
axes.
To use the superelevation values from the
design. If these values don't exist in the
design, then all superelevation values are
ignored.
To ignore all superelevation values from the
design and to enter them manually.
All superelevation values are ignored.
The target height is applied in plumbline to
the measured position.
a
b
Rail12_17
a Superelevation base
b Nominal gauge
c Measured point (Easting, Northing,
Height)
c
Roads - General