Table of Contents
Advertisement
Dxf Export Settings
838
Field
Option
Display only
Working job
Display only
Tunnel job
Display only
Layer
Display only
Start chain-
Editable field
age and
End chain-
age
Report
Editable field
sheet
Next step
Fn Settings goes to Dxf Export Settings.
Key
Description
OK
To save the settings and return to Export Dxf Profiles.
Description of fields
Field
Option
Columns
Editable field
Export exca-
Check box
vation areas
Close the
Check box
measured
profiles
Use a com-
Check box
parison
plane
CL height
Editable field
diff
Use a pro-
Check box
file offset
filter
Description
Available for To folder: Same as job. Dis-
plays the data storage device of the selected
Job.
Data is stored to this job.
Contains all the information about the tunnel
design including the geometry of the centre-
line and the tunnel profile. The files are
stored in the \DBX folder or a subfolder of
\DBX.
The tunnel job is a read-only source of infor-
mation.
The layer from the active tunnel job, selected
in the Define panel.
Define the range from which DXF profiles are
exported.
The name of the file to which the data is
exported.
Description
The number of columns to organise the DXF.
Example: With 4 selected, four profiles are
exported per line.
When this box is checked, the excavation
areas of the tunnel are exported.
When this box is checked, the exported pro-
files are closed for display purposes.
When this box is checked, a plane is added
to the export file for comparison purposes.
The plane is added in the defined difference
from the centreline.
Height difference from the centreline.
When this box is checked, only the profiles
for which the perpendicular offset to the
design profile is smaller than the defined
limit are exported.
Roads - Tunnel
Advertisement
Table of Contents
