Configuring Cogo - Leica Captivate Technical Reference Manual

38.3
Access
Settings,
General page
464
COGO calculation methods
Shift, rotate & scale
Area division
Angle
Horizontal curve
Triangle

Configuring COGO

Press Fn Settings in the Input panel of a COGO calculation method.
☞ Fn Settings is unavailable for Angle, Horizontal curve, and Trian-
gle.
This panel consists of several pages. The explanations given for the softkeys
given are valid for all pages.
Description
the centre point of an arc.
•
an offset point from a distance along,
•
and offset from, an arc.
an offset point from a distance along,
•
and offset from, a line.
• a base point on an arc of a known offset
point.
a base point on a line of a known offset
•
point.
new points along an arc by segmenta-
•
tion.
new points along a line by segmentation.
•
To calculate the coordinates of new points
using shifts, rotation and scale.
The values for the shift, rotation and/or scale
can either be entered manually or computed
using selected matching points.
For these calculations, points with full coor-
dinate triplets, position only points or height
only points can be used.
To divide an object by a
defined line.
•
• percentage.
defined size.
•
To calculate the angles that are defined by
three points.
To calculate the missing parameters of a
curve by the input of the known parameters.
To define a triangle by entering the three
sides of the triangle or by selecting three
points.
COGO