Table of Contents
Advertisement
58.7.2
Measure traverse
step-by-step
Traverse
9.
Forsght, Set:
Foresight ID The name of the foresight point.
Target height The target height of the foresight point.
Number of sets The number of sets to be measured.
10.
Measure to measure and record. The measurement settings for the
first measurement to each point are used for all further sets.
11.
Point Results
OK to move to the next setup, to return to the Point Results panel
(and set a point as a closing point), to survey a sideshot, to view tra-
verse data or to end the traverse.
12.
Move to move to the next setup.
☞
After pressing Move, Traverse is exited. To continue with the traverse
from the next setup refer to "58.7.2 Continuing an Existing Traverse".
Continuing an Existing Traverse
1.
Start the Traverse app.
2.
Traverse
Select Choose an existing traverse.
3.
OK to access Existing Traverse.
4.
Existing Traverse
Traverse ID The name of the traverse. ENTER to select a different
existing traverse.
☞
Data to view data of the active traverse.
☞
Fn Settings to change the working style settings.
5.
OK to access Backsight, Set:.
Enter Instrument height.
Hz, V and Horizontal distance The measured values are displayed.
Calc azimuth The calculated azimuth from the current setup point to
the backsight point.
Difference in horizontal distance and Difference in height The
difference between the computed and measured values.
☞
More to change between the displayed values.
6.
Measure to measure and record the backsight point.
7.
Forsght pt to measure a foresight point.
8.
Forsght, Set:
Foresight ID The name of the foresight point.
Target height The target height of the foresight point.
Number of sets The number of sets to be measured.
☞
Meas app to measure sideshot points.
9.
Measure to measure and record the foresight points. The measure-
ment settings for the first measurement to each point are used for
all further sets.
10.
Point Results
OK
955
Advertisement
Table of Contents
