Leica Captivate Technical Reference Manual page 306

Access
TS Offsets & Checks,
Target offsets page
306
d1
d2
d3
P1
d5
P3
P0
TS_003
Select Leica Captivate - Home: Settings\Point storage\TS offsets &
checks.
Key Description
OK To accept changes and return to Leica Captivate - Home.
Offset=0 To set all offsets to 0.000.
Page To change to another page on this panel.
Description of fields
Field Option
Offset Reset
mode after
storing
Perma-
nent
Offset Editable
left/right field
Offset Editable
in/out field
Offset Editable
height field
P2
d6
P0 Setup
P1 Current position
d4
P2 Offset point
P3 Offset point
d1 Offset cross left
d2 Offset cross right
d3 Offset length toward instrument
d4 Offset length away from instru-
ment
d5 Offset height down
d6 Offset height up
Description
The offset values are reset to 0.000 after a point
is measured with Store or Measure.
The offset values are applied to every measured
point until reset or changed.
Sets cross offset of target point, perpendicular to
the line of sight.
Sets length offset of target point, in the direction
of the line of sight.
Sets height offset of target point.
Settings - Point storage