Leica Captivate Technical Reference Manual page 814

Select Scans To Use
Define
814
Description of the methods
Method Description
Tunnel face Stakeout the tunnel face at a defined chainage. Design infor-
mation is defined relative to the centreline or the tunnel pro-
file.
Tunnel pro- Stakeout tunnel profiles at a defined chainage. Design infor-
file mation is defined relative to the centreline or the tunnel pro-
file.
Profile by Check tunnel profiles, by measuring deviations to the design.
measuring Design information is defined relative to the centreline or the
tunnel profile.
Profile by Check tunnel profiles, by automatically scanning at defined
scanning chainages to measure deviations to the design. Design infor-
mation is defined relative to the centreline or the tunnel pro-
file.
Profile gen- Extract as-built tunnel profiles from scanned point clouds and
erator check deviations to the tunnel design.
Next step
OK accesses the Define panel.
Available for Check: Profile generator.
Check the box in front of a scan ID to select a scan to use.
Uncheck the box in front of a scan ID to deselect a scan.
Key Description
OK To continue to the next panel.
The panel is an example valid for Stake: Stake face.
Key Description
OK To continue to the next panel.
Shifts To apply horizontal, vertical and profile shifts to the selected
element. Refer to "43.4 Working with Shifts".
Load To load a task. Refer to "43.5 Tasks".
Save task To save the settings as task. Refer to "43.5 Tasks".
Roads - Tunnel