Selecting A Line - Leica Captivate Technical Reference Manual

45.2.2
Access
☞
746
Field Option
Reference Left line or
line Right line
Show infor- Check box
mation to
an addi-
tional line
Additional Selectable list
line
For Stake: Layer
Field Option
Layer Selectable list
Centreline Display only
Extend end Check box
slopes
For Stake: DTM, available for Check road
Field Option
DTM layer Display only
Number of Display only
triangles
Next step
OK to access the Stake or Check panel.

Selecting a Line

In the Define panel, open a selectable list for a line, for example for Working
line or Left line.
The selection of lines depends on:
Availability of horizontal alignments
•
• Availability of vertical alignment information
View (plan or cross section view)
•
Working chainage defined or not
•
• Selected method
Description
To select one of the lines to be used as the
reference line.
When this box is checked, a second line can
be selected.
Allows chainage, offset and height difference
information to be obtained from any other
string of the layer independent from those
strings currently used. For example: Staking a
surface grade where the height information
comes from the surface grade but the chain-
age information comes from a string which is
not the centreline of the current layer.
The lines available as second lines.
Description
A list of all available layers of the selected
Road job.
Active centreline of the selected layer.
When this box is checked, the left most and
right most end slopes of the design are
extended.
Description
A list of all DTM surfaces available in the
selected DTM job.
Number of triangles the selected DTM con-
sists of.
Roads - Road