Table of Contents
Advertisement
18.8
☞
Description
Access
RTK Base Settings
(RTK 1)/
RTK Base Settings
(RTK 2),
General page
Connections - All other connections
Field
Option
Last or cur-
rent posi-
tion
None
Point ID
Selectable list
Base RTK 1 / Base RTK 2
Unavailable for GS08plus.
The real-time connection allows real-time related parameters to be configured.
These parameters include defining the real-time messages, data rates and time
slicing. Up to two real-time connections can be configured on the instrument.
For RTK base:
•
In Base Connection Settings highlight Base RTK 1. Edit.
☞
Two real-time devices can be attached to two different ports, for
example a radio and a digital cellular phone. On the reference, the
two devices can operate simultaneously. Highlight Base RTK 2 and
press Edit to configure a second real-time connection.
The available fields and pages on this page depend on the selected settings.
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
Device
Available for Connect using: GS Port 1/GS Port 2/GS Port
3/GS Port 4/GS radio/GS modem. To create, select, edit or
delete a device. Refer to "20.2 Accessing Devices".
Page
To change to another page on this panel.
Description
The position last used in a reference network
application or the current navigation position
can be selected using Last or Here. The
selected position is sent every 5 seconds.
No GGA message is sent to the reference
network.
Available for GGA position to send: From
job.
The coordinates of this point are sent out in
the GGA message.
195
Advertisement
Table of Contents
