Table of Contents
Advertisement
Set Orientation,
Backsight point code
page
Setup - TS
Field
Option
Difference
Display only
in horizon-
tal distance
Computed
Display only
slope dist
Difference
Display only
in slope dis-
tance
Difference
Display only
in height
Angle right
Display only
Next step
Page changes to the Backsight point code page.
Key
Description
Set
To set the setup and orientation and exit the Setup app.
New attrb
To create more attributes for this point code.
Last
To recall the last used attribute values for the selected code.
Default
To recall the default attribute values for the selected code.
Page
To change to another page on this panel.
Description of fields
For attributes for which an attribute name can be typed in: Tap on the field of
the attribute name or the field for the attribute value. The name of the attrib-
ute can be edited and an attribute value can be typed in.
Description
Available for Known backsight. The differ-
ence between the calculated horizontal dis-
tance from setup to backsight point and the
measured horizontal distance.
Available for Known backsight. Displayed
after More was pressed. The calculated slope
distance to the backsight point.
Available for Known backsight. Displayed
after More was pressed. The difference
between the calculated slope distance from
setup to backsight point and the measured
slope distance.
Available for Known backsight. The differ-
ence between the design height of the back-
sight point and the measured height of the
backsight point. If the backsight point is a
2D point, this field shows -----.
Available when Hz angle display: Angle
right is configured in Regional, Angle page.
Displays the horizontal angle difference
between the backsight point and the current
telescope position.
881
Advertisement
Table of Contents
