Leica Captivate Technical Reference Manual page 418

Icon
418
Hardware Description
keys
2 Zoom +
To zoom into the image.
3 Zoom -
To zoom out of the image.
SET
Selection window
To select multiple objects. Points within the rec-
tangular area are always selected. Lines are also
selected, depending on the direction of the rec-
tangular area, as detailed below.
Drag the stylus on the panel in a diagonal line
to make a rectangular area.
• Drag to the left to include all lines that pass
inside the area.
Drag to the right to include only lines that
•
are completely inside the area.
CAD layers
To turn layers of background maps (CAD files)
on and off. Refer to "6.2 Creating a New Job" for
information on CAD files.
Settings
To define the display settings. Change the cross-
hair colour, what is displayed in the 3D viewer,
separately to the plan or orbital views.
Data range
To define a range from the eye point by a mini-
mum and maximum distance. Only data within
the range is displayed.
Top slider
The maximum distance from the eyepoint, for
example set to 400.
Bottom slider
The minimum distance from the eyepoint, for
example set to 10.
Result
Points between 10 m and 400 m from the
eyepoint are displayed on the image.
☞
Switch between tap and turn and selection
mode. Available in the camera view.
To move the slider, tap on the slider,
hold and drag it.
3D viewer