Table of Contents
Advertisement
New Point,
Coordinates page
80
Key
Description
Store
To store the new point entered and all associated informa-
tion.
North or
Available for local geodetic or WGS 1984 geodetic coordi-
South
nates when WGS84 latitude is highlighted. Changes
between North and South latitude.
East or
Available for local geodetic or WGS 1984 geodetic coordi-
West
nates when WGS84 longitude is highlighted. Changes
between East and West longitude.
Next
To store the point and to remain in the panel. The point ID
increments according to point ID template.
Page
To change to another page on this panel.
Fn Coord
To view other coordinate properties.
Fn Tools
For an individual name independent of the ID template or to
change back to the next ID from the configured ID template.
Description of fields
Field
Option
Point ID
Editable field
Coordinate
Editable field
fields
Next step
Page changes to the Code page.
Description
The name of the new point. The configured
point ID template is used. The ID can be
changed in the following ways:
To start a new sequence of point IDs,
•
type over the point ID.
•
For an individual name independent of
the ID template Fn Tools and then Indi-
vidual point ID. Fn Tools and then
Sequential point ID changes back to
the next ID from the configured ID tem-
plate.
Negative geodetic coordinates are interpre-
ted as being of the opposite hemisphere or
other side of the central meridian. For exam-
ple, entering -25 °N is stored as 25 °S, enter-
ing -33 °E is stored as 33 °W.
Job Menu - View & edit data
Advertisement
Table of Contents
