Add/Edit A Layer - Leica Captivate Technical Reference Manual

New Template,
General page
44.8.3
Access
☞
Roads - Alignment Editor
Key Description
OK To accept the panel entries and continue.
Page To change to another page on this panel.
Fn Settings To configure the app. Refer to "44.3 Configuring Alignment
Editor".
Description of fields
Field Option
Template Editable field
name
Allow abso- Check box
lute heights
for cross
section def-
inition
Centre Editable field
height
Next step
Page changes to the Layers page where the layers of the template are listed.

Add/Edit a Layer

In New Template, Layers page or when editing a template, press New or
Edit.
Creating and editing a layer of a cross section template are similar processes.
For simplicity, only the creation of a layer is explained and differences are
clearly outlined.
Description
Name of the cross section template to be
created/edited.
If this box is checked, in addition to relative
to line input methods, absolute heights can
also be entered to define cross section seg-
ments.
To be able to create segments using absolute
heights, a centre height must be defined.
Available if Allow absolute heights for
cross section definition is checked.
731