Table of Contents
Advertisement
CAD Import
72
Metadata
Description
State
The state of the layer:
Hidden
•
These layers are not shown on the 3D viewer page and
their positions are not used when zooming to extents.
Nothing in these layers can be selected.
•
Visible
These layers are shown on the 3D viewer page and their
positions are used when zooming to extents. Nothing in
these layers can be selected. Empty dxf layers can be set
to visible.
•
Selectable
These layers are shown on the 3D viewer page and their
positions are used when zooming to extents. Objects on
these layers are available to be selected.
Description of fields
Field
Option
Prefix to
Editable field
use for
points, Pre-
fix to use
for lines or
Prefix to
use for
closed lines
Objects to
Vertices and
create when
lines
importing
entities
Only at ver-
tices
Only lines
Ignore data
Editable field
at height
Apply a
Check box
height to 2D
data
Height to
Editable field
apply
Description
The identifier with up to four characters is
added in front of the ID of the imported CAD
points, lines or areas.
•
Imports the CAD lines into the job.
Creates points at the starting and the
•
ending coordinates of the imported
line/arc/polyline elements.
Creates points at the starting and the ending
coordinates of the line/arc/polyline elements.
The elements are not imported.
Imports only the CAD lines into the job. No
points are created.
Height values inside the DXF file are consid-
ered invalid and are not converted.
When this box is checked, a height can be
defined which is then applied to all imported
2D CAD points.
Available when Apply a height to 2D data
is checked. The height to apply to 2D CAD
points.
Job Menu - Jobs
Advertisement
Table of Contents
