Table of Contents
Advertisement
Results,
General page
592
•
Curve - Along a curve section
Extension - Along an extended part of the line
•
•
Curve mid point - Mid curve point
Straight - Along a straight section
•
VPI - Vertical interesection point
•
•
Offset PI avg - Offset intersection point average element
If View results after staking a point is checked in Settings, General page,
this panel opens automatically once a point is measured and stored.
Key
Description
OK
To return to the stake panel.
Edit
To add a vertical offset to the design height and to display
the new height.
Page
To change to another page on this panel.
Description of fields
Field
Option
Point ID
Editable field
Chainage
Display only
Offset
Display only
Design height
Display only
Measured
Display only
height
Cut/Fill
Display only
Annotation 1
Display only
Annotation 2
Editable field
Next step
Page changes to the Coords page. This page displays the design coordinates
as well as the differences between design and measured coordinates.
Page changes to the Code where codes can be selected or typed in.
3D viewer provides an interactive display of the data.
Description
The point ID of the point staked.
The chainage measured at the stored point.
The offset from the alignment measured at
the stored point.
The entered design elevation.
The height measured at the stored point.
The height difference between the Design
height and the Measured height.
Fixed value recorded for certain software
packages.
Available for extra notes.
Measure to line/Stake to line
Advertisement
Table of Contents
