Table of Contents
Advertisement
Roads - Rail
The Rail Editor program is used to define the height of the rails at a
given chainage. The height of the rails can be defined by a rotation
point and a cant or by a left and right cant.
Describing the panel elements - Entering Track Information
Superelevation left and
right
Superelevation by curve
☞
To define the height of the rails
using one superelevation value for
the left rail and another supereleva-
tion value for the right rail.
To define the rails using a rotation
point and a superelevation value.
Once the method by which the
superelevation values are defined
has been selected, it cannot be
changed
791
Advertisement
Table of Contents
