Table of Contents
Advertisement
19.4
Description
Access
Connections - All other connections,
Control Key
Satel Radio Model
M3-TR3
M3-TR4
M3-R3
M3-TR1
The information displayed is queried from the Satel radio. The current status is
displayed. The information is not stored in Leica Captivate.
Key
Description
Store
To apply and send the new settings to the Satel radio and to
return to the panel from where this panel was accessed.
New
To create a channel.
☞
Edit
To edit the highlighted channel.
☞
Delete
To delete the highlighted channel.
☞
More
To change between Spacing (kHz) and Rx Freq. (MHz) on a
rover respectively Tx Freq. (MHz) and also Tx Power(mW)
on a base.
Description of metadata
Metadata
Description
Channel
Name/number to the channel. Any integer number between
-32767 and 32767 is allowed.
Rx Freq.
Available on the rover.
(MHz)
Receive frequency assigned to the channel in MHz.
Tx Freq.
Available on the base.
(MHz)
Transmit frequency assigned to the channel in MHz.
Spacing
Channel spacing assigned to the channel in kHz.
(kHz)
Tx
Available on the base.
Power(mW)
Output power assigned to the channel in mW
RS232
RS232 is a standard serial communication method that is able to transfer data
without the need for predefined time slots.
For RTK rover and TS:
In Connection Settings, highlight a connection which has an RS232
•
device attached. Control.
Firmware Version
2.0.4.2 or higher
2.1.0.3 or higher
1.0.9.3 or higher
3.63 or higher
Changes are only applied and send to the Satel
radio when pressing Store.
Changes are only applied and send to the Satel
radio when pressing Store.
Changes are only applied and send to the Satel
radio when pressing Store.
229
Advertisement
Table of Contents
