Table of Contents
Advertisement
Point Code Filter
7.6.3
Description
☞
Access
Stakeout Filter
100
This panel shows the point codes from the job and codes currently used as fil-
ter. Point codes are sorted according to the settings in Sort Codes.
Key
Description
OK
To close the panel and return to the panel from where this
panel was accessed.
Group
To activate and deactivate code groups. Accesses Code
Groups. Any code group that has been previously deactiva-
ted are displayed as deactivated here. Codes belonging to a
deactivated code group are not displayed in Point Code Fil-
ter.
Use
To activate and deactivate the filter for the highlighted code.
None or
To deactivate or activate all point codes.
All
Fn Sort
To define the order of the codes. Accesses Sort Codes.
Stakeout Filter
The settings on this panel define a filter for the Stake app. The Stake filter can
be applied to show points which are already staked or points that are still to
be staked.
The stakeout filter acts in addition to any other filter set in Sort & Filter. For
example, points still to be staked out with a particular code can be filtered.
In Sort & Filter, Points page, press Stake to access Stakeout Filter.
Job Menu - View & edit data
Advertisement
Table of Contents
