Table of Contents
Advertisement
50.4
Access
Choose Setup Point
876
Field
Option
Scale
Editable field
Next step
Page changes to the Report sheet page. Refer to ."36 Apps - General"
The setup method Orientate to object does not support a report sheet.
Choose Setup Point
A station point must be selected for Setup method: Set orientation, Setup
method: Known backsight, Setup method: Multiple backsights and Setup
method: Transfer height. Choose Setup Point is then accessed automati-
cally from Setup.
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
Fn Settings
To configure the Setup app. Refer to "50.3 Configuring
Setup".
Fn Coord
To view other coordinate properties.
Fn Scale
To activate scale correction and to type in values for the
scale corrections. Refer to "New Job,TS scale page".
Fn Atmos
To type in values for the atmospheric corrections. Refer to "
Atmospheric Corrections,Atmospheric ppm page".
Description of fields
Field
Option
Setup point
from
Job
Description
The user-entered scale factor. Available for
Scale mode: Fixed.
Description
The selection made here determines the
availability of the other fields on this panel.
A setup point can be selected from a job on
a data storage device.
Setup - TS
Advertisement
Table of Contents
