Cameras; Check & Adjust - Leica Captivate Technical Reference Manual

22.6
☞
22.7
22.7.1
Description
Electronic adjustment
262
Description of fields
Field Option
Main power
source
Internal
battery
External
power
Charge the Check box
internal bat-
tery when
external
power is
connected

Cameras

For information on camera and images refer to "32 Camera & Imaging".
Check & Adjust
Overview
Leica Geosystems instruments are manufactured, assembled and adjusted to
the best possible quality. Quick temperature changes, shock or stress can
cause deviations and decrease the instrument accuracy. It is therefore recom-
mended to check and adjust the instrument from time to time. This check and
adjust can be done in the field by running through specific measurement pro-
cedures. The procedures are guided and must be followed carefully and pre-
cisely as described in the following chapters. Some other instrument errors and
mechanical parts can be adjusted mechanically.
The following instrument errors can be checked and adjusted electronically:
Instrument error
l, t
i
c
a
ATRplus
Description
Determines the power source to be used
when internal and external batteries are
attached at the same time.
Select this setting if an internal battery and
an external power source are attached but
the internal battery must be used first.
Select this setting if:
• an internal battery is attached but an
external battery is attached later. Then
the external power source is used as
power source.
an external power source and an internal
•
battery are attached but the external
power source must be used.
If attached, the internal battery is charged
from the external power source.
Description
Compensator longitudinal and transversal index
errors
Vertical index error, related to the standing axis
Horizontal collimation error, also called line-of-
sight error
Tilting-axis error
ATRplus zero point error for Hz and V - option
Settings - TS instrument