Table of Contents
Advertisement
3.
4.
784
☞
Non-perpendicular offsets are not allowed. If necessary,
check Apply offsets to additional line. Type in the off-
set of the intersection point in relation to the selected
additional line (abutment centreline).
Fn Tools to access the toolbox and select Stake intersection
point.
In some cases, more than one intersection point can be calculated.
b
P1
P2
a
Road_104
a
Selected line
b
Additional line
P1 Intersection point 1
P2 Intersection point 2
P3 Intersection point 3
P4 Intersection point 4
In this case, a plot with the possibility to select the desired intersec-
tion point appears. The selection is made using the touch screen and
a selectable list.
All intersection points are marked with a yellow flag.
The point ID and the point symbol of a selected intersection point
are displayed in blue.
Height confirmation
Depending on the available height information of the selected lines
the following possibilities are available to define the height of the
intersection point which has been selected for stakeout.
P3
P4
Roads - Road
Advertisement
Table of Contents
