Table of Contents
Advertisement
51
51.1
Description
Diagram
Stakeout modes
☞
☞
Linked jobs and global
data
Stakeout
Stakeout
Overview
The Stakeout app is used to place marks in the field at predetermined points.
These predetermined points are the points to be staked. The points to be
staked can
•
be uploaded to a job on the instrument using Infinity.
exist in a job on the instrument.
•
be uploaded from an ASCII file to a job on the instrument. Use Import
•
data\ASCII from the job menu.
d1
P0
GS_057
d1
d2
P0
TS_009
Points can be staked using different modes:
•
Polar mode.
Orthogonal mode.
•
Staking out is possible for RTK rover and TS.
The points to be staked must exist in a job on the active memory device or can
be typed in.
Linked jobs will overwrite the points and lines from the global design job selec-
ted in Design Data.
P1
GS:
P0 Current position
P1 Point to be staked
d2
d1 Stakeout distance
d2 Height difference between
α
TS:
P1
P0 Setup
P1 Current position
P2
P2 Point to be staked
d3
d1 Stakeout element
d2 Stakeout element
d3 Stakeout element
current position and point to
be staked
Stakeout direction
893
Advertisement
Table of Contents
