Clearing Led History And Resetting Results - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00
Getting Started
Restore To Factory
Default SONET
Restore To Factory
Default SDH
4. Select the desired protocol mode. The protocol tabs and settings will be updated
to reflect the selected mode, and all of the protocol settings will revert back to
their factory assigned default values.
To restore from a settings configuration file:
1. Select Test Setup from the
2. Select the Restore the Test Set from File button.
3. The File Browser window appears.
4. If the settings file was save to a USB thumb drive, or to another drive letter, the
select Drive and choose the drive letter where the file is located
5. From the File list, select the name of the settings configuration to be restored.
6. Select OK to restore from the settings file.

Clearing LED History and Resetting Results

The unit uses the following functions to log event, alarm, and error activity monitored on
the incoming signal:
•
LEDs as displayed in the Quick Status LEDs area and the Large LEDs tab
•
Every LED has a text label (Status Indicator) which will turn Red when the
specific occurs, and remain Red after the event clears
•
The many Results windows display the number of events counted and/or the
total time the events occurred for
To only clear LEDs and Status Indicator history:
61
These options appear if your unit contains one or more
SONET/SDH board, but no PDH board
Common Function Buttons.