VeEX MPA User Manual page 99

MPA_e_manual_D07-00-129P_RevA00
MPA Chassis
When inserting the SFP or SFP+ laser module, the laser modules are inserted
upside down where the handles for the release mechanism is oriented underneath the
laser.
Port 1's Activity Indicator LED (#2) above Port 1's SFP/SFP+ module glows
green when Port 1's TX Laser is turned on
Port 2's Activity Indicator LED (#5) above Port 2's SFP/SFP+ module glows
green when Port 2's TX Laser is turned on
Each MPM-10G port (Test Unit) provides testing capabilities for the following SONET,
SDH, OTN, Ethernet, Fibre Channel and CPRI Interface rates:
•
SDH: STM-64(10G), STM-16(2.5G), STM-4(622M), STM-1(155M), STM-0(51M)
•
SONET: OC-192(10G), OC-48(2.5G), OC-12(622M), OC-3(155M), OC-1(51M)
•
OTN: OTU-1(2.66G), OTU-2(10.7G), OTU2e/1e(11.05G/11.06G),
OTU2f/1f(11.27/11.32G)
•
Ethernet (Optical SFP/SFP+): 10GbE LAN(10.3G), 10GbE WAN(9.953G),
2.5GbE, 1GbE, GFP-F/T
•
Ethernet (Electrical SFP): 12.5M, 125M, 1.25G, 10.3125G
•
Fibre Channel: 1.06G, 2.13G, 4.25G, 8.50G, 10.52G
•
CPRI (Unframed): 614.4M, 1.228G, 2.458G, 3.072G, 4.915G, 6.144G, 9.83G,
10.138G, 12.165G
The following table lists all of the Packet and Transport Interface Rates available on
each MPM-10G port, as supported by pluggable SFP+, SFP and/or SFP Electrical
modules.
99