VeEX MPA User Manual page 696

MPA_e_manual_D07-00-129P_RevA00
Count Statistics
Table
Traffic Stream Profile Configuration
(Specifically for GFP Mappings)
A packet stream's profile defines the type, size, content, destination address, and
source addresses for the frame.
The stream protocol supported is UDP/IP.
The Traffic Stream Profile dialog box is used to set the stream profile parameters
when the GFP mode is set to GFP Framed Ethernet or GFP Transparent. To access
this dialog box, select any of the four streams in the Stream Profile Table.
Parameter
columns display order.
The Count Statistics Table displays the following information
for both transmitted (TX) and received (RX) packets:
•
TX/RX - Defines which row of statistics is designated
for Transmit counts (TX) and which row is designated
for Receive counts (RX)
•
Packets - Displays the total number of packets sent
and received since the test was started
•
Pkts/sec - Displays the current rate of packets sent
and received in packets per second
•
Bytes - Displays the total number of bytes sent and
received since the test was started
•
Mbit/sec - Displays the current rate of packets sent
and received in Megabits per second
•
%BW - Displays the current percentage of bandwidth
of packets sent and received
Description
Packet Tab
696