Enabling/Disabling Security System Lock; Resetting The System - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00

Enabling/Disabling Security System Lock

This function allows an administrator to enable a Security System Lock, that only allows
one user with Read and Write permissions (this includes Calibration and Admin
users) to be logged in at a time.
This setting effects other Remote Client connections as well as SCPI connections
If a user with Read and Write permissions is already logged in, a window will appears
stating "System locked by another user". However, users with Read Only
permissions can still login.
When the user logs on with Read Only permissions, all settings functionality will be
disabled.
To enable Security System Lock:
1. From the System tab, select Security.
2. From Default Entry, select the Security System Lock check box. A checked
box indicates that the Security System Lock function is enabled.
To disable Security System Lock:
1. From the System tab, select Security.
2. From Default Entry, clear the Security System Lock check box. A cleared
check box indicates that the Security System Lock function is disabled.

Resetting the System

This Administrator function clears and restores all user accounts, and restores the
default Admin account.
User files, such as the protocol processor's transmit and receive settings, report
statistics, graphs, and test results, are not deleted. These files are managed using
File Services.
To reset the system:
1. From the System tab, select Security.
Security Screen
778