VeEX MPA User Manual page 438

MPA_e_manual_D07-00-129P_RevA00
•
Fibre Chan (2.125G) - 2G Fibre Channel testing
•
Fibre Chan (4.25G) - 4G Fibre Channel testing
•
Fibre Chan (8.50G) - 8G Fibre Channel testing
•
Fibre Chan (10.52G) - 10G Fibre Channel testing
The MPM-10G card supports hot-swappable SFP, SFP+
and Electrical SFP (RJ-45) laser modules.
The MPM-100G and MPM-100AR card supports hot-
swappable QSFP+ laser modules.
This setting is disabled when laser module is not inserted.
The wavelength of the selected interface is determined by
the specifications of the laser module being used.
Verify that the inserted laser module supports the desired
Interface rate prior to selecting it.
Constant LOS or LOF alarms may be present when an
unsupported Interface rate is selected or if the required laser
module is unplugged.
Not Assigned is displayed if the Interface listed above is
currently not configured.
SDH Tab
438