VeEX MPA User Manual page 426

MPA_e_manual_D07-00-129P_RevA00
Options
SHT / OTO
LNG / OTN
K2 Bits 6-8 (Ring Mode)
This function edits the 6th, 7th, and 8th bits of the K2 byte. These bits indicate if a FERF
or FEBE occurs at the line level. The current value displays in the User Setup column of
the APS Commands function.
Options
(000) Idle
(001) Br
(010) Br&Sw
(100) Ex Tr
(100) Unused
(101) Unused
(110) MS-RDI /
RDI-L
(111) MS-AIS /
AIS-L
Description
Short Path Code; Bit 5 = 0
Long Path Code; Bit 5 = 1. When selected,
both the Transmit Default and Transmit Illegal
button settings are configured for LNG/OTN.
Description
Idle, Bit pattern 000
Bridged, Bit pattern 001
Bridged and switched, Bit pattern 010. This is
the Transmit Default button setting.
Extra traffic on protection channel, Bit pattern
100
Not used, Bit pattern 10
Not used, Bit pattern 101
Multiplex Section Remote Defect Indicator, Bit
pattern 110
Multiplex Section Alarm Indication Signal, Bit
pattern 111. This is the Transmit Illegal button
setting.
SDH Tab
426