VeEX MPA User Manual page 342

MPA_e_manual_D07-00-129P_RevA00
Frequency Wide
OPU Generic AIS (Unframed -
PRBS 11)
LOF (Loss of Frame)
AIS-L (Alarm Indication Signal -
Line)
APS-L (Automatic Protection
Switching-Line)
SEF (Severely Errored Frame)
RDI-L (Remote Defect Indicator -
Line)
TIM-S (Trace Identifier Mismatch -
Section, for J0 byte)
Pat Sync (Pattern Synchronization)
PLM-P (Payload Label Mismatch -
Path)
Concat (Concatenated)
AIS-P (Alarm Indication Signal -
Path)
LOP-P (Loss of Pointer - Path)
UNEQ-P (Unequipped - Path)
The VT Errors and Alarms only appears when a VT mapping is selected.
The TCM Errors and Alarms only appears when
Enabled in the Receive settings.
LOP-V (Loss of Pointer - VT)
LOM-V (Loss of Multiframe
Alignment - VT)
UNEQ-V (Unequipped - Virtual
Transport)
RDI-V (Remote Defect Indicator -
Virtual Transport)
RFI-V (Remote Failure Indicator -
Virtual Transport)
TIM-V (Trace Identifier Mismatch -
Virtual Transport, for J2 byte)
PLM-V (Payload Label Mismatch -
Virtual Transport)
TC-RDI-P/V (Tandem Connection-
Remote Defect Indicator)
TC-ODI-P/V (Tandem Connection-
Outgoing Defect Indicator)
TC-AIS-P/V (Tandem Connection-
Alarm Indication Signal)
TC-UNEQ-P/V (Tandem
Connection-Unequipped)
TC-LOF-P/V (Tandem Connection-
Trace Identifier Mismatch)
TC-TIM-P/V (Tandem Connection-
Trace Identifier Mismatch)
TC Error/Alarm Processing
SONET Tab
is
342