MPA_e_manual_D07-00-129P_RevA00
Getting Started
3. Select Serial from the Connection branch listed under Category, to configure
the Serial port settings.
4. Enter the COM Port number that was automatically assigned for this USB
connection in Device Manage.
5. Configure the rest of the Serial Port settings as the following:
•
Speed (Baud): 19200
•
Data Bits: 8
•
Stop Bits: 1
•
Parity: None
•
Flow Control: None
6. Click Open to establish the connection and wait for the console window to
appear.
7. Press the Enter key to display the nat> command prompt.
8. Verify the connection by pressing Enter again to confirm that a second nat>
prompt appears.
Viewing the MCH current IP Address (Telnet or Serial):
31