Mpa Shutdown Procedure - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00
Getting Started
When the Remote Client
Licenses expiration date, a notice will appear on the Remote GUI to inform the user of
this fact.
A Timed License expires at midnight on the expiration date. At that moment, the circuit
pack will revert to its previous base license. If a test is running on the unit prior to
midnight, the test will continue to run and results can be viewed, printed, etc. No
settings changes can be made. The test can be stopped, but cannot be restarted. When
expired, the Timed License key will become invalid and the unit will restore the
permanent "Base License" key and operate according to the options defined by that
key.

MPA Shutdown Procedure

This procedure describes the step by step process for shutting down a rack-mounted
MPA system.
When an MPA system needs to be powered down, follow the instructions below in the
specified order.
Warning! Do not turn the chassis Power off or unplug the power cable without first
deactivating the SCM-210 card (or AM4022 Processor and MCH card) and Power
Supply.
1. First disconnect any remote software connections such as Remote GUI, VNC,
SCPI or other software connections to the device.
2. If your MPA unit has an AM4022 Processor and MCH card combination, then
pull out the Unlock/Extraction handle (to the first stop position) on the AM4022
processor. If your MPA unit has an SCM-210 card, then skip to step 4.
69
connects to an MPA unit within seven (7) days of Timed