MPA_e_manual_D07-00-129P_RevA00
The Receive function allows you to define the parameters used in SDH receiving
operations.
The following parameter setting options are available from the Receive screen:
•
Set > Set 1
•
Set > Set 2
•
Set > Set 3
•
SOH
•
POH
•
Capture
•
SIG (Signal Status)
SDH Receive - Set / Set 1
Use the Set 1, Set 2 and Set 3 screens to configure the SDH Receive parameters.
The following describes the functions that may appear on the Set 1 screen, depending
on the card type and configuration.
Function
Settings Control
Description
If Coupled is selected, settings changed on the Receive
screen will automatically change on the Transmit screen as
well.
If Independent is selected, settings established on the
Receive screen will only affect Receive mode.
SDH Tab
436